Envoy NT9010A Guida di Installazione Scaricare il pdf (Pagina 35)

Section 2.2: Changing How the NT9010 Works For Users

[17] - [✱]+[1] Reactivate Stay/Away Zones

This function key provides the user with a simple method for adding Stay/Away

zones back into the system (see [*] [1] Zone Bypassing on page 25).

[18] - [26] For Future Use

[27] - Status

Press this key to have the NT9010 announce the time and the current status of the

system. For example, the system may announce:

“Zones are open. Zone 1. Secure system before turning on. For more options,

press [✱].”

Pressing this key while the unit is speaking will cause the unit to stop speaking.

[28] - Volume

To change the volume of NT9010 announcements, press this key. The NT9010 will

announce the different volume levels.

[29] - Record

Press this key to begin recording a message through the NT9010 microphone. After

you hear the prompt “Record Memo Now” and a single 1 second tone, begin

recording your message. When you are finished recording, press [#].

[30] - Playback

Press this key to listen to a recorded message. If there is no message recorded, the

NT9010 will sound an error tone. You can stop playback of the recorded memo any

time by pressing [#].

NOTE:Keys [27] to [30] are instant function keys. They do not have to be

held for 2 seconds to activate.

2.2.11 Programming

Wireless Keys

If you will be adding WLS929-433 wireless keys, after you enroll them on the sys-

tem you may want to change the functions of the buttons on these devices.

If you enable the WLS Key Does Not Use Access Codes option, the disarm but-

ton will work on wireless keys which have not been assigned access codes. To pre-

vent disarming by wireless keys which don’t have access codes, disable this option.

To change wireless key function buttons, from Advanced Programming:

1. Enter section [804].

2. Enter the 2-digit sub-section number of the button you want to program:

[61] = Wireless key button 1

[62] = Wireless key button 2

[63] = Wireless key button 3

[64] = Wireless key button 4

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 63 64

Nessun commento

Envoy NT9010A Guida di Installazione Pagina 35