Envoy NT9010A Guida di Installazione Scaricare il pdf (Pagina 33)

Section 2.2: Changing How the NT9010 Works For Users

[*] [0] Quick Arm

If the Quick Arm Enable option is on, the system can be armed by entering [✱][0].

This is a useful method of arming the system when someone doesn’t have an

access code.

NOTE:The Quick Arm feature must be enabled in order for the Stay/Away

function keys to operate as intended. If the feature is not enabled, the user

will be required to enter a valid access code after pressing the Stay or Away

function key in order to arm the system in the stay or away mode.

[*] [0] Quick Exit

Quick Exit will allow someone to leave an armed premise through a Delay type

zone without having to disarm and rearm the system.

When [✱][0] is entered, if the Quick Exit Enabled option is on, the system will pro-

vide a two minute window to exit. During this time the system will ignore the first

activation of a Delay type zone. When the Delay zone is secured the system will end

the two minute time period.

If a second Delay zone is tripped, or if the zone is not restored after two minutes,

the system will start entry delay.

Quick Arm Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [015], Option [4]

Quick Exit Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [015], Option [3]

2.2.10 Function Keys There are eight function keys on the NT9010 labelled Stay, Away, Chime, Exit, Sta-

tus, Volume, Record and Playback. The operation of these keys is described below.

Users can activate each function by pressing the key.

The programming of any function key on the NT9010 may be changed to any of

the options listed below. To change the programming of a function key:

1. Enter [✱][8][Installer’s Code].

2. Enter section [807].

3. Enter [000] for function key programming.

4. Enter the 2-digit code for the function you want to program for each key. (Each

function is described below.)

5. When you are finished, press [#] to exit.

[00] - Null Key

The key is not used and will perform no function when pressed.

[01] - [02] For future use

[03] - Stay Arm

Arms the system in Stay mode. All Stay/Away type zones will be automatically

bypassed. Delay type zones will provide entry and exit delay. The Quick Arm fea-

ture must be enabled for this key to function (Section [015], Option [4]). If Quick

Arming is not enabled, the user must enter a valid access code after pressing the

function key in order to arm the system in the Stay mode.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 63 64

Nessun commento

Envoy NT9010A Guida di Installazione Pagina 33