Envoy NT9010A Guida di Installazione Scaricare il pdf (Pagina 14)

Chapter 1: Quick Set Up

You can use the Forward (Playback) button to advance to the next section in

Flash Programming, and the Backward (Record) button to return to the previous

section.

5. Be sure to record all the zone serial numbers and your programming choices in

the NT9010 Programming Worksheets.

Here are some notes about system programming done through Flash Programming.

Zone Definitions

When you enter a serial number for a device into the NT9010 Flash Programming,

the unit will analyze the number to determine what kind of device you are enroll-

ing. Based on the type of device, the system will make the following programming

choices:

NOTE: To ensure that the NT9010 works properly, you should enroll all

entry/exit point zones first.

NOTE:PIR’s covering entry points should be zone type [06] Delay Stay/Away

[01] Delay 1 Zone: If this zone is violated when the system is armed (e.g.

door or window is opened), the entry delay will begin. The buzzer

will sound to warn the user that the system must be disarmed. If the

system is not disarmed before the entry delay expires, an alarm will

be generated.

[05] Interior Stay/Away Zone: If this type of zone is violated when the

system is armed (e.g. the motion detector senses motion), an instant

alarm will be generated unless a Delay Zone is violated first. If a Delay

Zone is violated first, this zone will also follow the entry delay.

The zone will be automatically bypassed under the following condi-

tions:

■ the NT9010 is armed in the Stay Mode

■ the NT9010 is armed without entry delay ([✱][9] arming)

■ the NT9010 is armed with an access code and during the exit delay a

Delay zone is NOT violated (user does not go through the entry/exit

door).

If zones are automatically bypassed, the user can reactivate the zones

by entering [

✱][1].

Device Type Zone Definition Other Programming

Door/window contact

(2XXXXX, including hard-

wired contacts entered as

200001 and 200002)

Delay 1 (Type [01]) For hardwired zones (serial

numbers 200001 and

200002), Zone Supervision

disabled (section [804])

Motion or glassbreak

detector (3XXXXX)

Interior Stay/Away

(Type [05])

None

Smoke detector

(4XXXXX)

Delayed 24 Hour Fire

(Type [87])

None

Wireless key (6XXXXX) None None

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Commenti su questo manuale

Nessun commento

Envoy NT9010A Guida di Installazione Pagina 14

Commenti su questo manuale